Brand: 3M
Kit Contains:
Suitable for certain asbestos work: Refer to local asbestos government guidelines (Safework Australia or Worksafe NZ) Protection Factors Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant IDLH levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: With a 3M 7500 Series Half Face Respirator: 10 times the Workplace Exposure Standard (WES) or 30 ppm, whichever is the low
A Half-face respirator covers the lower half of the face, including the nose and mouth. which relies on the wearer to pull air in through cartridges or filters.
The kit contains:
*Note: Higher P3 protection factors are only achieved with a 3M Full Face Respirator; otherwise, P2 protection level when worn on a 3M Half Face Respirator.
This kit provides protection against certain asbestos work (refer to local asbestos government guidelines), lead paint removal, sanding, sawing, drilling, cutting, grinding, masonry, and insulation tasks.
Yes, the 3M™ 7500 Series Half Face Respirator is reusable. It should be cleaned regularly using the provided cleaning wipes, and filters should be replaced according to the manufacturer's guidelines and exposure levels.
Yes, the 3M™ Asbestos/Dust Respirator Kit 7535 complies with AS/NZS 1716:2012, meeting the performance requirements for respiratory protective devices in Australia.
The included 3M™ 6035 filters are rated P2 when used with a half-face respirator. To achieve P3 protection, the filters must be used with a 3M Full Face Respirator.
This kit includes:
*Note: Higher P3 protection factors are only achieved with a 3M Full Face Respirator; otherwise, P2 protection level when worn on a 3M Half Face Respirator.
The 3M™ 7500 Series Half Face Respirator features a soft silicone facepiece for enhanced comfort and a Cool Flow™ Valve to reduce heat and moisture build-up, making it suitable for extended use in demanding environments.
The 3M™ 6035 P2/P3 Particulate Filters come with a solid top casing that helps reduce premature caking and clogging from dirt, grime, water, or dust, and aids in decontamination practices.
This respirator kit complies with AS/NZS 1716:2012, ensuring it meets the necessary performance requirements for respiratory protective devices in Australia.
SCode: AT010601592 |
S$157.66 Low Stock |
MCode: AT010601600 |
M$157.66 In Stock |
LCode: AT010601618 |
L$157.66 In Stock |
