A Half-face respirator covers the lower half of the face, including the nose and mouth. which relies on the wearer to pull air in through cartridges or filters.

The kit contains:

• 1 x 3M™ Half Face Respirator 6000 Series
• 1 x pair of 3M™ Multigas Cartridges A1B1E1K1
• 1 x pair of 3M™ 5925 P2 Particulate Filters
• 2 x 3M™ 501 Filter Retainers
• 2 x 3M™ Respirator Cleaning Wipes 504
• 1 x 3M™ Respiratory Protection Guide
• 1 x Sealable Storage Container

The A1B1E1K1 cartridges protect against:

• Organic vapours with boiling points >65°C (Type A)
• Inorganic gases and vapours (Type B)
• Acid gases (Type E)
• Ammonia and amine vapours (Type K)

Combined with the P2 particulate filters, the kit also protects against airborne particles such as dust, mist, and fumes.

When used with the 3M™ 6000 Series Half Face Respirator, this kit provides protection for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is lower. Note that filtering respirators should not be used for protection at airborne concentrations of contaminants above the relevant IDLH levels.

Yes, the 3M™ 6000 Series Half Face Respirator is reusable. It should be cleaned regularly using the provided cleaning wipes, and filters should be replaced according to the manufacturer's guidelines and exposure levels.

Store the respirator in the provided sealable storage container to protect it from moisture and contaminants, thereby extending its service life.

Yes, the 3M™ Multi-Gas Respirator Kit 6259 is certified to AS/NZS 1716:2012 for respiratory protective devices.