SR500/580/584 Fan Unit with Helmet & Welding Shield

SUNDSTRÖM

SR 500/SR 584/SR 580

Package with SR 500 and SR 584/SR 580

Kit with Sundström SR 500 fan unit and protective helmet SR 580 with welding visor SR 584. Contains, SR 500 fan unit, SR 580 protective helmet with visor, SR 584 welding cassette, passive welding filter shade 10, battery STD, battery charger SR 513, leather belt SR 503, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs steel net disc SR 336, 2 pcs pre-filter holder, flow meter, plug kit, cleaning tissue and user manuals.

SUNDSTRÖM SR 584/SR 580 features

The SR 584 welding shield is intended for use together with the Sundström SR 580 Helmet with visor. Complete helmet with welding shield together with the battery-powered SR 500 fan and approved filters are included in the Sundström fan-assisted respiratory protection device systems. The breathing hose of the helmet with visor is to be connected to the fan, equipped with filters. The overpressure in the helmet's visor prevents particles and other pollutants from being admitted into the breathing zone.

The equipment can be used as an alternative to filter respirators in all situations for which filter respirators are recommended. This applies particularly to work that is hard, warm or of long duration. Before use, a welding lens with appropriate density must be mounted in the welding shield.

SUNDSTRÖM SR 500 features

• Two speeds (175 and 240 l/min)
• Lithium-ion battery
• Battery available as Standard (STD)
• Battery recharge time: approximately 1.5 h (STD)
• Supplied with 2 filters
• Operating time up to 7 hours (USED AND BLOCKED FILTERS MAY DECREASE BATTERY OPERATING TIME)
• Single control for on, off and operating status
• Automatic air flow control