$30.32 (inc GST)
In Stock
Product Code: SUNSR510
Brand: SUNDSTROM
Size: NASIZE
Mechanical particle filter with exceptionally low breathing resistance for protection against all types of particles.
The SR 510, P3 R particle filter is designed for use in Sundström half masks, full face masks, and the SR 500 / SR 500 EX / SR 700 fan. The filter provides protection against all types of particulate pollutants.
The particle filter can easily be combined with gas filters from the Sundström filter range to provide protection also against gases and vapours, e.g. during spray painting. The particle filter should be combined with pre-filter SR 221, which will extend the life of the particle filter.
Specification | Details |
---|---|
Material | Plastic polypropylene. No metal parts. |
Size | Largest diameter: 107 mm. Thickness: 31 mm. |
Weight | 44 g |
Filtration Paper | Particle filter contains about 1,300 sq cm (200 sq inches) hydrophobic fibreglass paper. |
Filtration Efficiency | Paraffin oil aerosol: >99.997% (tested by INSPEC). |
Pressure Drop | At 30 l/min: 40 Pa (standards requirement: <120 Pa). At 95 l/min: 120 Pa (standards requirement: <420 Pa). |
Storage | Store at room temperature in a clean, dry place. If the seal has been broken, store away from contaminants in an airtight container. Shelf life is 10 years if the seal is unbroken. Expiry date printed on filter. |
Standards/Approval | AS/NZS 1716:2012 |
The Sundstrom SR510 P3 filter is a mechanical particle filter with exceptionally low breathing resistance for protection against all types of particles.
The Sundstrom SR510 P3 filter can be used against all types of wet and dry particles. Some examples are Dust, smoke, aerosols, spray, asbestos, bacteria, viruses and mould.
SR221 The low-cost pre-filter sorts out coarse wet and dry particles which protects the main filter and prolongs its service life.
The Sundstrom SR510 P3 filter is certified and approved to AS/NZS 1716.
The Sundstrom SR510 P3 filter can be attached to Sundström non-threaded gas filters. It is also used on front of Sundström's threaded gas filters when used on the SR500 PAPR
Captures ≥99.997% of airborne particles, including dust, smoke, aerosols, asbestos, bacteria, and viruses.
Engineered for minimal airflow resistance, ensuring comfort during extended use.
Easily integrates with Sundström gas filters for combined protection against particulates, gases, and vapors.
Use with the SR 221 pre-filter to prolong service life and reduce maintenance costs.
Made from polypropylene with hydrophobic fiberglass media; free from metal components.
Sealed filters have a 10-year shelf life when stored properly