CLEANSPACE PAF-0014 - Thick Neck Pads The CleanSpace2 Neck Pads are designed to be used with CleanSpace2 Respirators (PAF- 0034). The Neck Pads (thick and thin) are included with every CleanSpace2 (PAF-0034) unit and may be used alternately. These parts (PAF-0014 and PAF-0016) are spares used for replacement in case of damage or loss. The Neck Pads are made of foam with neoprene (fabric)...
CLEANSPACE PAF-0016 - Thin Neck Pads The CleanSpace2 Neck Pads are designed to be used with CleanSpace2 Respirators (PAF- 0034). The Neck Pads (thick and thin) are included with every CleanSpace2 (PAF-0034) unit and may be used alternately. These parts (PAF-0014 and PAF-0016) are spares used for replacement in case of damage or loss. The Neck Pads are made of foam with neoprene (fabric)...
CLEANSPACE PAF-0025 - Fit Test Adaptor The CleanSpace Half Mask Adaptor for Quantitative Fit is designed to be used with the CleanSpace Half Masks. The mask fit test adaptor is fitted in the front of the half mask to enable a Quantitative Fit (TSI PortaCount) Test. Instructions for use are provided with the adaptor. NOTE: The CleanSpace Full Face Mask (PAF-1014) requires the CleanSpace Full...
CLEANSPACE PAF-0028 - Half Mask Exhalation Valve Assembly Spare valve to suit PAF-0028 mask Pack of 2
CLEANSPACE PAF-0030 - Head Harness The CleanSpace2 Head Harness is designed to be used with the CleanSpace2 Respirator (PAF-0034). The Head Harness is included with every CleanSpace2 Unit (PAF-0034). The part (PAF-0030) is a spare used for replacement in case of damage or loss. The Head Harness is made of fabric and attached to the Unit using Velcro strips. IMPORTANT: These Head Harness is...
CLEANSPACE PAF-0049 - Protective Unit Coverall The CleanSpace Protective Unit Cover is a disposable cover that protects CleanSpace respirators from dirt and splash eg water, paint and cement. The Protective Unit Coverall should be changed after each use. IMPORTANT: When selecting a CleanSpace Filter please consult a Health and Safety specialist for advice on the appropriate respiratory...
CLEANSPACE PAF-0073 - Ultra & EX Head Harness The CleanSpace Ultra & EX Head Harness is designed to be used with the CleanSpace Ultra or CleanSpace EX PAPR Power Units (PAF-0060 & PAF-0070). The Head Harness comes with every CleanSpace Ultra and CleanSpace EX PAPR. The part (PAF-0073) is a spare used for replacement in case of damage or loss. The Head Harness is made of TPU plastic, neoprene...
CLEANSPACE PAF-0074 - Ultra Decon Plug Set The CleanSpace Ultra Decontamination Plug Set is designed to be used with the CleanSpace Ultra Respirator unit (PAF-0070). It is a tool used to seal all the openings on the CleanSpace Ultra PAPR unit for storage during and after decontamination. Do not wear the respirator when the plug set is in place. The Plug Set is made of nylon and silicone and...
CLEANSPACE PAF-0075 - Helmet Hook Strap Accessory The CleanSpace Helmet Hook Strap Accessory (PAF-0075) is designed to be used with a CleanSpace Respirator. It is designed for use when wearing the respirator with a safety helmet. When the Helmet Hook Strap Accessory is interchanged with the rear tail on the Head Harness, it comfortably supports the CleanSpace Respirator without interfering...
CLEANSPACE - Neck Support The CleanSpace Neck Support is designed to be used with the CleanSpace Ultra and CleanSpace EX PAPR units. The CleanSpace Neck Support is a non-fabric spare and comes in two sizes. The SMALL neck support is for smaller head and neck sizes and the LARGE neck support is for larger head and neck sizes. The Neck Support is made of polyethylene plastic and is safe for use...
CLEANSPACE PAF-1015 - Full Face Mask Quantitive Fit Test Porta Count Adaptor The CleanSpace Full Face Mask Quantitative Fit Test (PortaCount) Adaptor is designed to be used with the CleanSpace Full Face Mask (PAF-1014). It is utilised as a mask fit test adaptor to be fitted in the front of the mask for Quantitative Fit (TSI PortaCount) Testing. Used with the revolutionary CleanSpace PAPR:...
CLEANSPACE PAF-1016 - Harness Spare harness to suit PAF-1014
CLEANSPACE PAF-1017 - Full Face Spectacle Kit The CleanSpace Full Face Mask Spectacle Kit (PAF-1017) is designed to allow prescription lens to be used with the Full Face Mask without compromising the face seal. The frame is fully adjustable for all face sizes, wide frames to fit large lenses for peripheral vision; The frame is engineered to provide stability during vigorous activity and is...
CLEANSPACE PAF-1018 - Full Face Mask Tear off Visor Anti-Scratch Protectors The CleanSpace Full Face Mask Tear off Visor Anti-Scratch Protectors are designed to be used with the CleanSpace Full Face Mask (PAF-1014). The Protectors are protective films for the Full Face mask (PAF-1014) visor and ensure that the lens is protected from daily wear and tear. The tear offs can be replaced...
CLEANSPACE PAF-1019 - Full Face Mask Exhalation Valve Spare valve to suit PAF-1014 Pack of 2
CLEANSPACE PAF-1020 - Full Face Mask Inhalation Valve Spare valve to suit PAF-1014 Pack of 6
CLEANSPACE PAF-1021 - Full Face Mask Exhalation Valve Cover Spare valve to suit PAF-1014
CLEANSPACE - Full Face Mask Orinasal The CleanSpace Full Face Mask Orinasals are designed to be used with the CleanSpace Full Face Mask (PAF-1014). The PAF-1022 Orinasal (S) come with every CleanSpace Full Face Mask. PAF-1022 is a spare used for replacement in case of damage or loss. PAF-1027 is an accessory for larger face and lip length. The Orinasals are made of silicone and polycarbonate....